Hello,

Have drawn up a digital sketch of a 612 cabinet based upon the iconic cab sketch and the 612C blueprint.

I want to build this cabinet , but I am uncertain if it is good enough , since it is a mix of two...

The height is 29 inches as on the iconic cab ( not 29 1/2 inches on the 612C )
The bass port is as on the 612C - I just put it somewhere on the front baffle. - will appreciate any suggestions on where it should be.

One more thing: should I also make brackets in this enclosure as in the 612C?

Will make new drawings and post them after new suggestions...

PS: The height on the front baffle is wrong (the height should be 22 1/8 but is 22 7/8) - will fix it later on.